To ensure we produce the best quality product that we possibly can, in February this year, we put some restrictions on the bespoke nature of our bedrooms. Here is a reminder of those restrictions, which have enabled us to create the perfect balance between flexibility and quality:

• Minimum Robe Height = 1600mm

• Maximum Robe Height = 2400mm

• No unit depth changes

• Maximum Door Width = 600mm

• No internal dividers - fitters to modify on site

• No fixed shelves at dedicated heights - fitters to modify on site

No width changes on:

• Units with drawers

• Internal drawers

• Pull-out shelves

Sliding Door Information

• NEW! Light Grey MFC panel
  This is a very good match for Egger board U708. Should you require a sample, please get in touch. 

• NEW! Graphite, Nickel and Dove Grey frames

• Discontinued - Polished chrome frame.

Door Overlaps

When considering adding internal units behind sliding doors, please take into account the door overlap measurement, as well as the width of the door, when determining the width of the internal units.

The standard overlaps used for each type of sliding door are shown below:
Cadgwith = 20mm
Lulworth = 24mm
Portmore = 35mm

Calculating Width of Door Opening

To calculate the width of each door, determine how many overlaps there will be and multiply this by the overlap measurement. E.g. 3 doors will have 2 overlaps. If using Cadgwith doors: 2 x 20mm = 40mm. Add this figure the overall opening width e.g. 40 + 2450 = 2490mm. Now divide this total by the number of doors e.g. 2490 / 3 = 830mm. Each door will be 830mm wide.